modernwizard: (Default)
A minor character in a Monster High ep, Finnegan Wake [har!], is a mer dude who speeds everywhere, mowing people down, and behaves with a mixture of insouciance and recklessness. [He's referred to as Rider in this wiki, but it's clearly the same character.] He also uses a manual wheelchair.

Mattel had a chance to create a really cool character who had a visible disability, but was not defined thereby. Instead, what did they do? They defined him by his disability. As the ep Ready, Wheeling and Able shows, the main monsters recognize that he uses a wheelchair and assume that he's into sedate, sedentary activities. After some platitudes about not jumping to conclusions and letting people do what they want, the main characters realize that Finnegan is much more at home on the track [?]. He assures everyone that, if he needs help with anything, he'll let people know, and then he asks someone to light his wheels on fire so he can do a trick.

In summary, Finnegan may appear at first glance to be some sort of super awesome stereotype-busting character. However, his adrenaline junkie behavior just acts as a blatant, sweating insistence that he's INDEPENDENT and AUTONOMOUS and ATHLETIC and FULLY CAPABLE DAMMIT EVEN THOUGH HE'S IN A WHEELCHAIR. As an implicit contrast to wheelchair users as silent, passive, objectified characters, Finnegan hits the other extreme and, because he tries so hard not to end up like the stereotype, he ends up referring all the more pointedly to the stereotype itself. An anti-stereotype, made with the intention of compensating for the failures in the original stereotype, still reinforces the stereotype. We can see this in the description for his episode: "When Rider rolls into Monster High, the ghouls learn there's more to this wheelchair-bound new student body than meets the eye." Yup, even though Mattel has strained mightily to progressively depict a character in a wheelchair, they still think he's bound to his chair, forever immobilized.

Finnegan also drives me up the wall because he's an inconsiderate, dangerous jerk. His ep introduces his character with a Finnegan-cam view of people diving out of his way as swerving and squealing noises occur. In other words, Finnegan barrels down the halls of Monster High at high speed, forcing people to yield the right of way. He seems to forget that he's not the only one in the universe with a mobility impairment. For just one example, zombies like Ghoulia and Slo-Mo walk with much more difficulty than most people, but apparently Finnegan doesn't care; he'll just run them over because going fast is cool! Nah, he's just an ass...
modernwizard: (Default)
While I was lying in bed earlier this week, I hit on a possible way to construct 1:6 scale forearm crutches without the exorbitant expense of printing something so long. I can bend plastic drinking straws to the appropriate 15-degree angle and then fill them with Aves Apoxie Sculpt so that they stay in that position!!!! I have also recently acquired some dowels that I can cut down to make hand rests for the crutches. I haven't decided how to make the forearm cuffs, but that's easy compared to the engineering challenge of making the crutch shafts. Diagram below.

Read more... )
modernwizard: (Default)
I finally got the wheels for Peter's walker in the mail today, ordered from a supplier of remote-control vehicles and supplies, RC Planet. I mounted one wheel on each foot of the walker with a piece of plastic-coated wire hot glued in a hole that I drilled through the side of each leg.

Read more... )


modernwizard: (Default)
Polly tests out one of my Barbie wheelchairs, for which her tail is too long. I still haven't decided how I want to customize her chair. Polly has stated, however, that she would rather have this green checked shirt than the I BELIEVE IN CHAMP shirt. Well, one less thing I have to make. :pRead more... )
modernwizard: (Default)
I decorated Walker 3.0 with lots of black electrical tape and some black craft foam for the seat cushion. Besides breaking up the glaring expanses of fluoro orange, the electrical tape suggests joints or sockets, adding to the impression of a piece of equipment constructed from various bars. The black also stands out vividly on the orange field, attracting the eye and thus drawing attention away from the uneven texture.

To make the walker even more useful, I added a basket and a purse-like bag so that Peter can hold stuff. Now that it looks less like a horrible failure and more like a mobility aid customized by one of my favorite Zville denizens, I feel more well disposed toward the walker. Still needs wheels though...
Read more... )
modernwizard: (Default)
Five months ago, I received the 1:6 scale walker pieces that Batchix printed out for me. However, I was so bitter about my earlier failures that I just glared resentfully at the pieces for the next five months. I did not look forward to the assembly -- what with removing flash, drilling, pinning and gluing, I anticipated another messy failure and even greater bitterness.

I overcame my grudge last night to begin work on Walker 3.0. Batchix helpfully provided blueprints, some of which are shown below, to aid me in assembly:
Read more... )
modernwizard: (Default)
Thanks to melopoeia who sent me this link, I just now learned about Kaylene Kau's prosthetic arm designed for people who have amputations below the elbow. Its tentacle-like design simplifies the usually complex design of manual prosthetics, resulting in an appendage that requires fewer parts and motors than most arms of its type. Though Kau conceptualized this prosthesis at least as far back as 2010, it's news to me.

This is so cool! I definitely need to make one of these in 1:6 scale so that someone in Zombieville can use one!
modernwizard: (Default)
I just signed up to attend a free orientation at Blu-Bin tomorrow, which will give me the necessary information about their policies, parameters and products! After reading a mediocre Meetup.com review, I'm not expecting miracles, but at least I should come away knowing what file types Blu-Bin accepts, the different properties of their printed plastic, how they scale models correctly and the general cost of items.

I just got a few more ideas for things to make besides forearm crutches:
  • single-footed canes
  • four-footed canes
  • white canes [for visually impaired people]
  • below-the-knee prostheses
  • below-the-elbow prostheses
I would really like to create one of the old-fashioned below-the-elbow prostheses with a functional forked hook, but that would require finding a hook. A below-the-knee prosthesis would probably be easier, since it wouldn't be articulated at the end.

The possibilities are exciting!



modernwizard: (Default)
I decided to make forearm crutches for Brandeis because her cane ain't the appropriate height. Also, as it's very lightweight, it falls over and does not bear weight.

First, I acquired a protractor from Wikipedia. I then acquired a representative photo of a forearm crutch in profile. Then I overlaid the protractor on the picture of the crutch to determine the major angles involved in its construction.

Read more... )
modernwizard: (Default)
Andrea linked me to an auction that included a pair of Power Team forearm crutches. I thought I might bid on it, but it turns out that the shipping alone would be $20.00. :p I really want more 1:6 scale mobility aids, but that price is a little steep.

This morning I realized that I have a knowledge of what actual crutches look like, a 3-D modeling program and a local 3-D printing shop, Blu-Bin. I can make my own crutches!

Here's my plan: I'll use the modeling app to create the crutches themselves, with their specific -15 degree bends at the top and their handrests at the appropriate position. The crutches will be longer at both ends than necessary so that I can cut them to fit the various heights of my dolls. The forearm cuffs I will make separately out of wire, ribbon or some flexible material and then glue on later.

This project requires no precise, symmetrical bending of wire or steel rods, as my early iterations of the walker did. I only need to do basic 3-D modeling with some cylinder primitives, then hack and glue. I'm an expert manipulator of primitives, rotary tools and glue guns, so I think that this project will probably be simpler than the walker.

modernwizard: (Default)
Chaz' mobile throne is done. [Chaz also has a haircut.] Details on construction in the last two pictures.
Read more... )
modernwizard: (Default)
Some weeks ago, I used one of the last warm days in November to empty a can of fluorescent pink spray paint on the base of Chaz' electric wheelchair, a 1:24 scale ForTwo Smart Car. Today I finally connected the wheelchair's seat -- a salon chair that I acquired this summer -- with the base.
Read more... )

modernwizard: (Default)
I've grown to hate it. It has sat on my desk, unfinished, for so long, that I now resent its imperfect and failed state. Because I now hate it, It's unsalvageable. I've spent too much time on it for too little result. 

I'm thinking about doing some forearm crutches instead.
modernwizard: (Default)
Yes! After long last, Peter finally has a functioning walker that actually looks like a walker. This evening I glued the front bars on, hitching up the two side pieces. I then added the tires.

Read more... )
modernwizard: (Default)
I primed and spray painted Peter's walker today. I knew that the dowels would take paint without trouble, but I thought the paint might not attach to the wire hangers. However, the primed hangers took paint fine!

It took all day to prime each side of the frame pieces twice, with drying in between, then the opposite sides, with drying in between. Then I spray painted one coat on each side of the frame pieces, let dry, repeated, spray painted the flip sides, let dry, did touch up, let dry, did more touchup, let dry. Finally I put everything on the enclosed back porch to fully dry out and offgas for a while.

Once the pieces have really dried and offgassed, I can hot glue the frame together. Next steps will be adding wheels [also with hot glue -- very easy] and then figuring out where and how to pad the frame.

Read more... )

modernwizard: (Default)
Here's Peter showing off my latest attempt at his walker. Instead of making a walker with a seat, I'm just making a walker with a metal frame and wheels on the ends of the legs. Side frames are made out of wire coat hangers, with side supports out of 3/16" diameter dowel pieces, held in place by my best friend hot glue. I plan to prime and spray paint this all black tomorrow.


Read more... )

modernwizard: (Default)
I'm going to ditch my current attempt at Peter's walker. I need to start all over again with another folding chair. This time, I will do the following differently:

I will not cut down the seat depth.

I will use coat hangers as a source of wire for the frame, rather than 10 gauge solid core copper, which bends very hard.

I will not use Aves Apoxie Sculpt to adhere the pieces of the frame together, as it destroys the sleek lines I'm going for.

Bllllah. This project has caused me nothing but frustration. However, I am determined to try once more, given what I have learned from my initial mistakes. If this doesn't work, I'll commission someone to make one. However, it's much cheaper and easier to make my own.
modernwizard: (Default)
Today I also got some sort of salon chair that will serve as the base for Chaz' electric wheelchair. Finally she can get out of the manual!

I think I need to darken Chaz' faceup some more. It keeps washing out.

Read more... )

modernwizard: (Default)
Temporary armpit crutches, not forearm crutches. 

Hmmm, maybe I should make Peter forearm crutches instead of a walker. The walker is being a shit.
modernwizard: (Default)
I raised it up higher by not gluing the wheels so far up the chair legs. I also removed the default plastic front cross brace and added double front wheels. Walker is now about 1cm taller [and so is Peter, for that matter, making him more proportional, thank God!].

This project is giving me so much grief. -_-

Read more... )

modernwizard: (Default)
Anna's wheelchair finally fits her. I lengthened the foot rest bar, which was originally too short. I also adjusted the joybox so that it extends out from the end of the armrest so that she can reach it with her left arm in a natural, relaxed position.

Read more... )
modernwizard: (Default)
More correctly, I should say that Peter has been altered to fit the walker. I took at least 2cm, possibly a bit more, out of both his thighs and his ankles. Yes, I am aware that he now looks ungainly, with long arms, massive hands and short legs. I'm okay with that. Very few people have idealized proportions. ^_^

Read more... )



modernwizard: (Default)
Here's Peter with the latest iteration of the walker in progress. I added a front cross brace and handlebars this weekend. They are made out of 8 gauge solid copper, which I bent with the help of a hammer and lots of cursing.

As you can see, the walker is too short. The handles should be as high as the creases in his wrists. I have spent so much time on this damn thing that, at this point, it will be easier to make Peter shorter than to reconfigure his walker. >:[

Read more... )
modernwizard: (Default)
...take the damn thing to the store and look at solid-core electrical wire in appropriate gauge!
modernwizard: (Default)
About six months after I acquired a base for a 1:6 scale walker for Peter, I'm finally assembling it. Here's its current status.
Read more... )
modernwizard: (Default)
I started off conceptualizing Zombieville denizens as people who use wheelchairs, canes, walkers and other mobility aids. I've been working on Isabel, Anna and Peter, however, all of which have obvious signs of physical damage: Isabel is missing her eye; Anna is missing patches of skin on her face, her right forearm and her right hand; Peter is grey all over and missing a whole segment of his left cheek. I therefore realized that PWS [people with spondis] also tend to have obvious signs of injury.

I've added some signs of injury to Peter and Anna by giving them bandaged wounds. Both of them have strips of tissue wrapped around bare body parts and secured with white glue. Impregnating the tissue with white glue also helps the bandages mold to their bodies, giving a more realistic appearance. I've also cut very small strips of Band-Aids and wrapped them around Anna's worst fingers and put one on the back of Peter's hand.

Now I'm thinking about further signs associated with spondis besides mobility aids and bandages. I'm thinking of the following:
  • Arm slings.
  • Wrist splints/supports.
  • Knee braces, either soft or with metal frames and joints.
  • Casts.
I'll have to work on this.
modernwizard: (Default)
It's gonna be one of those super deluxe ones with four [relatively] big rubber tires and a built-in seat. Like this:
Read more... )

modernwizard: (Default)
I just finished making two 1:6 scale electric wheelchairs, one for my sister [whose dolls use wheelchairs, as she does] and one for me. The photos below do not provide a true tutorial, but I think that they document my progress in enough detail that interested parties could figure out my process.
Read more... )





modernwizard: (Default)
...I want to make other mobility aids: a walker and a quad cane! [I think I need a "mobility aids 1:6" tag.]
modernwizard: (Default)
In my previous entry, I discussed the paucity of commercially produced 1:6 scale wheelchairs, all of which are out-of-print manual chairs. While manual wheelchairs are much more common than electric ones, I, as a bourgeois person in the United States, see many more electric wheelchairs [and their cousins: scooters] on a daily basis than I do manual ones. And I'm extremely irritated that there are no 1:6 scale electric wheelchairs!!!

Therefore I decided to make one.Read more... )

modernwizard: (Default)
According to this infographic, there are about 54 million people in the US with disabilities. Of these people, about 10 million use mobility aids, such as canes, crutches or walkers, while about 3.3 million use wheelchairs. This abstract suggests that the vast majority of wheelchair users use manual wheelchairs, with only a small number using electric wheelchairs [also called power chairs]. Given the sheer number of wheelchair users, wouldn't you expect there to be 1:6 scale wheelchairs for your dolls and/or action figures?
Read more... )
modernwizard: (Default)
The following items are on their way to support my doll crack habit:

First off, electric wheelchair parts! I ordered two ZC World Online office chairs, one pink, one blue, from their first series, not their weird, webbing-based second series. I also ordered two New Ray 1:24 scale Fortwos, color irrelevant, as they will be sculpted lightly over and repainted. Finally, I got two Iwako erasers in the shape of pencil sharpeners for joyboxes.

While I was on the site, I also ordered erasers in the shapes of a laptop, a tablet computer and a box of crackers that look suspiciously like Ritz. These will not be part of the electric wheelchairs. :p

Second, I got a 1:6 scale door!!!!!! It's a fancy wooden frame for a photo album, measuring about 8 x 13 inches, which is good enough for me. Needs a door knob, as well as the eradication of that wreath-like travesty up by the fan light, but that's okay. I also don't mind the dings and scratches because well-used front doors rarely look pristine. Best of all, this was just $15.84, most of which was shipping in a medium priority flat rate box.

Oh yeah, and, if anyone wants to search for a similar door, it's from House of Lloyd in their Christmas around the World series. I recommend searching for "christmas door photo album," though. Very few of the Ebay listings for this door mention its brand. It was incredibly hard to find that information, by the way, so you're welcome. :p
Look...a door! )

As i have repeatedly mentioned, Theophany will be coming home from Andrea's house later this month, along with some neon ribbons for Novella's crop top straps and flame-like fabric for Mellifer's wrap skirt.

In other 1:6 scale BJD news, there's another one coming. She's a completed tan Nan Sook by Batchix, along with some damaged heads and a junk torso. I'm thrilled to have another addition [really cute, also really rare!] to my 1:6 scale resin hordes at an unbelievable steal, and Batchix is thrilled that someone wants one of her factory second BJDs. No name or character yet, but I would like to do some zombification experiments on her spare parts.... Muah hah hah! >:}

modernwizard: (Default)
...the perfect motor housing/chair pedestal for a 1:6 scale electric wheelchair: a New Ray 1:24 scale diecast model of the Fortwo Smart Car! This bash will be so much easier than I thought!
modernwizard: (Default)
Preserved grass mats, 12" x 12". At least two, maybe even three. These need to be mounted on some stiff backing so that they don't flop the way that my current grass does. >:(

ZCWO office chairs as electric wheelchair bases. At least three: one for me, one for my sister, one for making mistakes. Still need wheels....

A front door. Here is a simple exterior door with a small nine-panel window in the top half. Here is a fancier exterior door with side window panels. I think they actually open and close!

Alternatively, there are photo albums that look like doors. Here's one [not originally sold with nauseating embellishments], but I don't know the manufacturer or anything about it. There's also ones like that below, which I found on Ebay by searching for "christmas door photo album." These are just 12" high, so they may be too short.
Read more... )
modernwizard: (Default)
Some things are pretty easy to find in 1:6 scale: upholstered furniture, beds, tables, desks, etc. Other items are either more challenging or nonexistent. I have a "covet list" of those things that I either have never found ever or have been too cheap to invest in:

An electric wheelchair. These do not exist in 1:6 scale, so I'd have to make my own. I'm already plotting the use of an office chair as a base.

A fireplace. Playscale ones exist, but they are undersized. Truly 1:6 scale fireplaces are expensive fuckers.

A toilet. Playscale toilets that are pink and/or undersized can be procured, but appropriately large toilets in typical toilet colors are very very very rare.

A folding screen. Expensive fuckers.

A front door. Photo albums that look like front doors can be had with some digging, and playscale dollhouse exterior doors do exist. They are, of course, expensive fuckers.

An armoire. A jewelry box could easily double as one, but they're [say it with me] expensive fuckers.

modernwizard: (Default)
Little Assistance makes custom, functional wheelchairs in a variety of styles for 1:12 dolls. I really wish they made 1:6 wheelchairs.

EDIT: They do custom wheelchairs in 1:6! For hundreds of dollars!

Tags

Syndicate

RSS Atom

Style Credit